All Devices

Flickering Red + Green

New device not yet bound to the HUB. 

Enable binding to bring the new device into the system.

Solid Green

Indicates:

Collector is on.

Gate Control is in its Open position.

Trigger is unlocked.

None

Solid Red

Indicates:

Collector is off.

Gate Control is in its closed position.

Trigger is locked.

None

Slow Blinking Red (and device doesn't appear in devices list)

Device is operating on a different mesh network channel.

Admin-→ Mesh Network-→ Channel (tab)-→ Allow New Devices to 'Yes'-→ Inform Devices.

This enables binding of new devices and informs them of the channel of the HUB.

Solid Orange

Device is running a software update.

Wait for updates to complete before using that device.

Collector

Slow Blinking Red (after collector has been running/on) 

Device will transition from Green (on) to Slow Blinking Red (has received the off command and is completing its Delay Off timer) to Red (off).

None

Trigger

Fast Flashing Red

Device is in Emergency Lock mode. This occurs when the Trigger quickly locks power to an associated tool due to detecting unexpected current spike upon unlocking. 

Turn the associated tool off with its power button then unlock the Trigger again.

If Trigger continues to enter Emergency Lock mode, adjust the Activation Level and/or Power Profile for the Trigger.