120V 15A Laser Trigger

Laser Trigger

Plug-and-play automation tuned for 120V laser cutters up to 15 amps.

The 120V Laser Trigger is purpose-built for CO2 and diode laser cutters — detecting laser activity inline and signaling the GRIT Hub to start exhaust fans, open blast gates, and log runtime, without touching the laser's internals. One Trigger per laser.

Key Features

• Laser-tuned sensing: Detects laser activation with no wiring changes
• Automated exhaust: Starts exhaust fans and opens gates on laser-on
• Runtime logging: Tracks who ran the laser, when, and for how long
• Access control lockout: Blocks power until an authorized badge is scanned
• Status LED: Red/green light shows locked, idle, or running at a glance

Specifications

• SKU GA-TR6001
• Voltage 120V
• Amperage 15A continuous
• Phase Single-phase
• Plug Type NEMA 5-15
• Cord 1 ft, 14 AWG
• Connectivity Wi-Fi to GRIT Hub
• Status Red/green LED

In the Box

• 1x GRIT 120V 15A Laser Trigger (GA-TR6001)
• 1x 14 AWG pass-through cord with NEMA 5-15 plug and receptacle

Compatibility

Works with any 120V laser cutter drawing up to 15A continuous on a standard NEMA 5-15 outlet. Pair with GRIT Gates and Collectors for automated exhaust. Hub Pro required for RFID access control and multi-zone systems.

Installation

Plug the laser into the Trigger, plug the Trigger into the wall outlet, and pair with the Hub through the GRIT app. No tools, no wiring, under two minutes.

*GRIT Hub is required for device functionality.

Important Notes

Verify your laser draws under 15A continuous before ordering. Triggers in Pro GRIT Track systems are subject to a 20% software upgrade charge — contact GRIT for details.