Skip to Content
  1. All products
  2. Collector
  3. 220v 15A Collector
  4. Collector
Pricelist: - Pricelist
Pricelist: - Pricelist

220v 15A Collector

Collector

Plug-and-play automation for 220V single-stage dust collectors up to 15 amps.

The 220V Collector is the inline switching module for bigger single-stage dust collectors — 2HP cyclones, 220V Jet DCs, CamVacs — that need more power than a 120V circuit can deliver. Plug it in, pair it to the Hub, and it starts the collector automatically when a GRIT Trigger fires.

Key Features

  • Inline relay: Switches the collector on and off on Hub command
  • Plug-and-play: No wiring changes, no access panels
  • Coordinated startup: Hub sequences the collector after blast gates open
  • Status LED: Red/green indicator shows idle or running
  • Reliable pairing: Wi-Fi connection to the Hub

Specifications

  • SKU GA-CO1002
  • Voltage 220V
  • Amperage 15A continuous
  • Phase Single-phase
  • Plug Type NEMA 6-15
  • Cord 1 ft, 14 AWG
  • Connectivity Wi-Fi to GRIT Hub
  • Status Red/green LED

In the Box

  • 1x GRIT 220V 15A Collector (GA-CO1002)
  • 1x 14 AWG pass-through cord with NEMA 6-15 plug and receptacle

Compatibility

Works with any 220V single-stage dust collector drawing up to 15A continuous on a NEMA 6-15 outlet — 220V CamVacs, 2HP Jet DC-1200vx, and similar. Does not work with the GRIT Track RFID system — contact GRIT if RFID access control is required for this zone.

Installation

Plug the collector into the GRIT Collector, plug the Collector into the wall, and pair with the Hub through the GRIT app. Under two minutes.

*GRIT Hub is required for device functionality.

Important Notes

Verify your dust collector draws under 15A continuous on 220V before ordering. Collectors in Pro GRIT Track systems are subject to a 20% software upgrade charge — contact GRIT for details.

$ 150.00 $ 150.00
$ 150.00