MagSwitch Collector
Collector
Magnetic-switch automation for dust collectors with a mechanical starter.
The MagSwitch Collector drops into any dust collector that uses a magnetic contactor starter. The Hub monitors which Triggers are active and tells the MagSwitch when to start and stop the collector — turning a standard manual-start collector into a fully automated component of your shop.
Key Features
- Magnetic switch control: Drives the contactor coil on tool-on events
- Tool-linked automation: Starts and stops based on any Trigger in the zone
- App visibility: View collector status and rules from the GRIT app
- Configurable activation: Set which tools or zones wake the collector
- Hub-coordinated: Sequenced with blast gates for efficient collection
Specifications
- SKU GA-CO2000
- Control Magnetic switch driver
- Integration Contactor coil
- Connectivity GRIT Mesh Network
- App Status + rules
In the Box
- 1x GRIT MagSwitch Collector (GA-CO2000)
Compatibility
For any dust collector that uses a magnetic contactor starter — cyclones, bag houses, and central collection systems with mechanical motor starters. Contact GRIT if you are unsure whether your starter is compatible.
Installation
Wire the MagSwitch output into the contactor coil circuit, power the device, and pair with the Hub through the GRIT app. We recommend a licensed electrician for any wiring into a starter panel.
*GRIT Hub is required for device functionality.
Important Notes
Systems with GRIT Track require a software upgrade (+20%) — contact us before ordering so we can configure your devices.