Tutorials & FAQs · 0:54
FAQ: Where Do I Start?
Not sure where to begin with GRIT? This quick guide helps you identify the right starting point for your shop.
What this video covers
Not sure where to begin with GRIT? This quick guide helps you identify the right starting point for your shop.
Published 2023-04-22. Runtime: 0:54.
Continue with GRIT
Use the related Solution page for product options, retrofit details, and the next step for your shop.
Video guide
Key points and full transcript
Scan the main points and chapter list, or open the complete transcript below.
Key takeaways
- Start an automated dust-collection project by contacting GRIT with a tool list.
- Include phase, voltage, and amperage so GRIT can select appropriate Triggers and prepare an estimate.
- GRIT supports tools from 120 volts through 480-volt three-phase, plus CNCs, lasers, lathes, and floor sweeps.
Chapters
- Where to start
- Contact GRIT with your goals
- Provide tool power details
- Supported tool range
Read the full transcript7 timecoded passages
This machine-generated transcript was reviewed and lightly edited for product names, technical terms, and readability.
Where do I start? Where do I start is a question that I get probably more often than anything. And I would say that if your goal is to automate your dust collection, you start by contacting us. If you send us a list of your tools, the phase of power, the voltage, the amperage of your tools, we can get you an estimate that day. We have triggers that cover everything that you would potentially have in your shop from 120-volt all the way up to 480-volt three-phase. We work with CNCs and
lasers and we even have a remote style switch for when you're using a lathe or a floor sweep.
Tutorials & FAQs · 0:54
FAQ: Where Do I Start?
Not sure where to begin with GRIT? This quick guide helps you identify the right starting point for your shop.
What this video covers
Not sure where to begin with GRIT? This quick guide helps you identify the right starting point for your shop.
Published 2023-04-22. Runtime: 0:54.
Continue with GRIT
Use the related Solution page for product options, retrofit details, and the next step for your shop.
Video guide
Key points and full transcript
Scan the main points and chapter list, or open the complete transcript below.
Key takeaways
- Start an automated dust-collection project by contacting GRIT with a tool list.
- Include phase, voltage, and amperage so GRIT can select appropriate Triggers and prepare an estimate.
- GRIT supports tools from 120 volts through 480-volt three-phase, plus CNCs, lasers, lathes, and floor sweeps.
Chapters
- Where to start
- Contact GRIT with your goals
- Provide tool power details
- Supported tool range
Read the full transcript7 timecoded passages
This machine-generated transcript was reviewed and lightly edited for product names, technical terms, and readability.
Where do I start? Where do I start is a question that I get probably more often than anything. And I would say that if your goal is to automate your dust collection, you start by contacting us. If you send us a list of your tools, the phase of power, the voltage, the amperage of your tools, we can get you an estimate that day. We have triggers that cover everything that you would potentially have in your shop from 120-volt all the way up to 480-volt three-phase. We work with CNCs and
lasers and we even have a remote style switch for when you're using a lathe or a floor sweep.