GRIT Heavy Duty 220V 35A Collector

Collector

Plug-and-play automation for high-draw 220V single-stage dust collectors up to 35 amps.

The GRIT Heavy Duty 220V 35A Collector sits inline between a compatible dust collector and its wall outlet. When a GRIT Trigger detects tool activity, the GRIT Hub commands this Collector to switch the dust collector on and off automatically. It is most often used with compatible CamVac collectors that restart when line power is restored.

Key Features

• 35A capacity: Controls high-draw 220V single-stage dust collectors up to 35 amps continuous.
• Four cord options: Choose NEMA 6-15, NEMA 6-20, L6-20, or L6-30 at checkout.
• Automatic control: Starts and stops the collector from GRIT Hub commands.
• Coordinated startup: Lets the Hub open assigned blast gates before the collector starts.
• GRIT Mesh: Receives local control commands through the GRIT Automation network.
• Status LED: Red and green indicators show device state at a glance.

Specifications

• SKUs GA-CO2101, GA-CO2102, GA-CO2103, GA-CO2104
• Voltage 220V
• Amperage 35A continuous
• Phase Single-phase
• Cord Options NEMA 6-15 (14 AWG) NEMA 6-20 (12 AWG) L6-20 (12 AWG) L6-30 (10 AWG)
• Connectivity GRIT Mesh Network
• Status Red and green LED

In the Box

• 1x GRIT Heavy Duty 220V 35A Collector in the cord type selected at checkout

Compatibility

For 220V single-phase, single-stage dust collectors that draw no more than 35A continuous and restart when line power is restored. This Collector is commonly used with compatible CamVac models. It is not compatible with dust collectors that use a contactor or motor starter; choose a GRIT MagSwitch Collector or contact GRIT if the collector's starting method is uncertain.

Installation

Select the cord that matches the dust collector and wall outlet, plug the dust collector into the GRIT Collector, and plug the Collector into the wall. Pair it with the GRIT Hub through the GRIT App and assign the tools or zones that should start it.

*GRIT Hub is required for device functionality.

Important Notes

Verify 220V single-phase power, cord type, continuous amperage, and direct line-power restart behavior before ordering. Do not use this product with a contactor or motor starter. Collectors in Pro GRIT Track systems are subject to a 25% software upgrade charge — contact GRIT for details.