GRIT MagSwitch Collector
Collector
Magnetic-switch automation for dust collectors with a mechanical starter.
The MagSwitch Collector drops into any dust collector that uses a magnetic contactor starter. The Hub monitors which Triggers are active and tells the MagSwitch when to start and stop the collector. The collector then follows the linked tools automatically.
Key Features
- Magnetic switch control: Drives the contactor coil on tool-on events
- Tool-linked automation: Starts and stops based on any Trigger in the zone
- App visibility: View collector status and rules from the GRIT app
- Configurable activation: Set which tools or zones wake the collector
- Hub-coordinated: Sequenced with blast gates for efficient collection
Specifications
- SKU GA-CO2000
- Power 110–240V AC through the red and black power leads
- Control Magnetic switch driver
- Integration Contactor coil
- Connectivity GRIT Mesh Network
- App Status + rules
In the Box
- 1x GRIT MagSwitch Collector (GA-CO2000)
- Red and black AC power leads, current transformer and green/black control harness
Compatibility
For any dust collector that uses a magnetic contactor starter, including cyclones, bag houses and central systems with mechanical motor starters. Contact GRIT if you are unsure whether your starter is compatible.
Installation
Connect the red and black AC power leads to a verified 110–240V AC source identified on the collector drawing. The MagSwitch does not accept 12V DC power. Wire the control harness for the starter type, install the CT around one motor-load conductor and bind to the Hub. We recommend a licensed electrician for any wiring into a starter panel.
*GRIT Hub is required for device functionality.
Important Notes
Systems with GRIT Track require a software upgrade (+25%); contact us before ordering so we can configure your devices.