Skip to Content

GRIT Gate Control

Gate Control

Bolt-on automatic gate control for standard metal blast gates from 2.5 to 12 inches.

The GRIT Gate Control mounts to the blast gate already installed in your ductwork. When an associated tool starts or stops, the GRIT Hub commands the actuator to open or close the gate. Select the variant that matches the gate diameter without replacing the gate or changing the ductwork.

Key Features

  • Automatic gate action: Opens and closes with associated tool activity through the GRIT Hub.
  • Eleven sizes: Covers standard metal blast gates from 2.5 to 12 inches.
  • Retrofit mounting: Bolts onto the gate already installed in the ductwork.
  • GRIT Mesh: Coordinates gate status and commands through the Hub.
  • Daisy-chainable power: Multiple Gate Controls can share a compatible 12V low-voltage power run.
  • Status LED: Shows open or closed state at the gate.

Specifications

  • Sizes 2.5", 3", 4", 5", 6", 7", 8", 9", 10", 11", 12"
  • Power 12V DC
  • Fits Standard metal blast gates
  • Mounting hardware #10-24 screws sized for the selected range
  • Wire 10 ft of 18/2 solid-copper thermostat wire
  • Connectivity GRIT Mesh to GRIT Hub or Hub Pro
  • Status Open/closed LED

In the Box

  • 1x GRIT Gate Control actuator in the size selected at checkout
  • 1x gate arm sized for the selected diameter
  • 1x slide guide set
  • 2x #10-24 screws and washer nuts sized for the selected Gate Control range
  • 1x removable 12V low-voltage terminal
  • 10 ft of 18/2 solid-copper thermostat wire

Compatibility

Fits existing standard metal blast gates from 2.5 to 12 inches. Blast gates are not sold by GRIT Automation and are not included. This product does not replace the separate GRIT iVac Retrofit Gate Control used with existing iVac gates; contact GRIT if the gate style or actuator fit is uncertain.

Installation

Match the selected actuator to the gate diameter, fasten the bracket and arm to the existing metal gate, and connect the included low-voltage wire to a GRIT 12V Power Bank or another compatible 12V DC supply. Pair the Gate Control with the Hub through the GRIT App and assign it to the corresponding tool or collection zone.

*GRIT Hub is required for device functionality. 12V Power Bank sold separately.

Important Notes

Blast gates are not sold by GRIT Automation.

Pricing is provided with your quote.
  • Size
Size 12", 11", 10", 9", 8", 7", 6", 5", 4", 3", 2.5"

Frequently asked questions

What sizes and gate types does Gate Control fit?

GRIT Gate Control fits free-sliding metal blast gates from 2.5 to 12 inches, in eleven sizes. It mounts on the gates you already have. GRIT does not sell blast gates, and self-closing or spring-loaded gates aren't compatible. For gates or dampers larger than 12 inches, contact us with the application details.

Can a gate stay open after the tool stops?

Yes. With a collector tied to the tool, the last-used gate stays open until another tool needs a different gate. For a fixed run-on, set a Deactivation Delay in the Trigger's Advanced Power Profile. A 4-second delay keeps the collector running and the gate open 4 more seconds.

How many Gate Controls can one Power Bank run?

It depends on how many gates move at once and how long the wire runs are. Each Gate Control can draw up to 4 amps while moving, and the GRIT Power Bank 12V 20A supplies 20 amps total across both outputs. Shops with many users or long runs add Power Banks closer to clusters of gates.

We ordered the wrong size. Can we swap parts?

Yes, within the same size range. Gate Controls are built in three ranges: 2.5 to 4 inches, 5 to 8 inches and 9 to 12 inches. Inside a range, we swap the gate arm and slide arm for the size you need. Moving to a different range needs a different Gate Control. Email us your order number and the gate size.

What warranty comes with GRIT Gate Control?

Gate Controls carry a 1-year warranty. The optional GRIT subscription keeps Triggers and Gate Controls under warranty for as long as it's active. Ask us to include it in your quote.